Home › Honda Civic Si › Brake pads + fluid
Civic Si · Brakes
Civic Si Brake pads + fluid
Your Civic Si
Pick your year so we only show parts that fit your car.
Stops better
Medium$120–$2502–3 hrs
Why do it
Better pads and fresh fluid for a car that's now faster.
Heads up
Brakes are safety-critical. If you've never done brakes, have someone experienced check your work.
Tools you'll need
- Jack stands
- Socket set
- Caliper piston tool
- Brake bleeder kit
- Brake fluid type specified for your car
Parts to buy
- Hawk HPS 5.0 front pads HB875B.666 Fits 10th-gen Civic Si.Fits 2017–2020
- Motul RBF 600 DOT 4 brake fluid (500ml) High-temperature fluid. Get 2 bottles for a full bleed.Fits 2017–2020
Doesn't fit your car (0)
Always double-check fitment for your exact year, trim and transmission before buying. Prices change. ModBuddy doesn't earn money from these links.
Steps
- Raise the car and remove the wheels.
- Swap the pads, keeping clips and hardware in place.
- Bleed the brakes following your service manual's order.
- Pump the pedal until firm, then bed in the pads.
Safety first
- Park on flat, solid ground, set the parking brake and chock the wheels.
- Use jack stands rated for your car. Never get under a car held up only by a jack.
- Let the engine and exhaust cool completely before touching them.
- Disconnect the negative battery terminal before unplugging sensors or electrical parts.
- Wear safety glasses, and gloves around sharp heat shields and hot fluids.
- Tighten bolts to the torque spec in your factory service manual.
- If a step doesn't match your car or you're unsure, stop and ask a shop.
These are overview steps written to help you plan the job. Always follow the instructions that come with your part and the procedures and torque specs in your factory service manual. Horsepower is an estimate; results vary.